Cap D2 for Hand Oil Screw Press to Produce Olive Oil and Coffee

Cap D2 for Hand Oil Screw Press to Produce Olive Oil and Coffee PB0003

Made in Europe

The Cap D2 is of excellent quality. The Cap D2 has designed to fit in the Hand Oil Screw Press PB0001.

Attach the Cap D2 and the flat washer in the Hand Oil Screw Press to produce, quick and easy, your own olive oil!

Attach the Cap D2 with the L-shapped washer in the Hand Oil Screw Press to grind, quick and easy, coffee beans! This way you will always have your favorite coffee freshly grounded! Perfect for espresso, greek coffee or filter coffee.

The package of the Cap D2 includes Cap D2, flat washer, L-shapped washer and a brush to clean, quick and easy, the Hand Oil Screw Press.

• Produce olive oil in 1 step from olives with a large kernel and little flesh.
• Produce olive oil in 2 step from any olives variety.
• Produce olive oil from dried crushed olives.
• Ground coffee beans.
• Appropriate for contact with food.
• For the user manual of the Cap D2 click here.

Dimensions:
• Length: 3 cm.
• Width: 4 cm.
• Height: 4 cm.
• Weight: 93 gr.

Produce Olive Oil in 1 Step

The Hand Oil Screw Press with the Cap D2 and the flat washer can produce, quick and easy, olive oil only in 1 step! Unfortunately, the manufacturer of the Hand Oil Screw Press cannot give you any assurance about olive breeds that are suitable for this purpose. You will have to try your own olives to find out if your olives are suitable for the one step method.

It seems that olives with a large kernel and little flesh give best results. These are the old varieties and wild olives. Use fresh, oil olives, fully ripened, with their kernel.

You must replace the Cap D1, of the standard equipment, with the Cap D2 on the Hand Oil Screw Press. Make sure that you have put the flat washer in the Cap D2. Tighten up the Cap D2 on the press cage until you are sure that the flat washer has been tightened firmly. The flat washer leaves enough room to the screw, so it can be rotated. Insert the adjustment bolt onto the Hand Oil Screw Press, just like you use it with the Cap D1 of the standard equipment.

Initial setting for the Adjustment Bolt:
You must leave the outlet of the Cap D2, fully open.

Fill the burner bottle with paraffin oil and light the burner. The burner is used during pressing of the olives. Before use, heat up the Hand Oil Screw Press during 20 minutes.

Place a container under the Hand Oil Screw Press to collect the produced olive oil. Make sure that the olives you want to press are at room temperature 25°C - 30°C. While the crank is rotated, you must fill the Hand Oil Screw Press with olives, frequently. Use fresh fully ripened oil olives with theirs kernels. You could add some dried olives leaves, depending on your personal preferences.

Push the olives into the Hand Oil Screw Press with the pestle from the Easyfill Set. Do not overfill the Hand Oil Screw Press because too mach pulp in the press cage blocks the oil flow. Once the press cake leaves the cap, slightly tighten the adjustment bolt until optimal extraction. It takes some practice to find the best setting for the Cap D2.

For Olive Oil production in 1 step use the following products:

1. Hand Oil Screw Press PB0001.
2. Cap D2 for Hand Oil Screw Press to Produce Olive Oil and Coffee.
3. Easyfill Set PB0007.

Produce Olive Oil in 2 Steps

The Hand Oil Screw Press with the Cap D2 and the flat washer can produce olive pulp - paste (also called olive pomace or olive cake) for olive oil production.

The olives that can not produce olive oil in 1 step, produce olive pulp - paste. With the use of press like Press No1, Press No2 or Press No3 extract the olive oil from the olive pulp - paste. That is the procedure to produce olive oil in 2 steps.

To produce Olive Oil in 2 Steps use the following products:

1. Hand Oil Screw Press PB0001.
2. Cap D2 for Hand Oil Screw Press to Produce Olive Oil and Coffee.
3. Easyfill Set PB0007.
4. Press as Press No1, Press No2 or Press No3.

You must replace the Cap D1, of the standard equipment, with the Cap D2 on the Hand Oil Screw Press. Make sure that you have put the flat washer in the Cap D2. Tighten up the Cap D2 on the press cage until you are sure that the flat washer has been tightened firmly. The flat washer leaves enough room to the screw, so it can be rotated. Insert the adjustment bolt onto the Hand Oil Screw Press, just like you use it with the Cap D1 of the standard equipment.

Initial setting of the adjustment bolt:
You must leave the outlet of the Cap D2, fully open.
Do not use the burner.

1. Fill the Hand Oil Screw Press with Easyfill set PB0007, with fresh fully ripened olives, including the kernels.

2. Add the moisture that left the Hand Oil Screw Press through the oil slit to the pressed paste.
3. Keep the olive paste warm at 27°C - 30°C ( malaxation ) for one hour while slowly stirring it. Part of the oil will float on the paste already.
4. Put a fine-woven cheese cloth in the press cage of the press and fill it with the warm olive paste.
5. Slowly lower the press plate and oil and water will flow out of the press.
6. The press cake is fairly dry.
7. Leave the pressed olive oil with water to settle until the oil is floating on top of the water. Separate the olive oil from the water (decant). If there is any contamination in the olive oil, this will settle. What remains is a clear olive oil that produced in 2 steps!

Olive Οil from Dried Crushed Olives

The Hand Oil Screw Press with the Cap D2 for Hand Oil Screw Press to Produce Olive Oil and Coffee and the flat washer can produce olive oil from dried crushed olives. The dried crushed olives have a long shelf life! This allows you to crush and dry your olives and when you have time to produce fresh olive oil.

To produce olive oil from the dried crushed olives, you will need:

1. Hand Oil Screw Press PB0001.
2. Cap D2 for Hand Oil Screw Press to Produce Olive Oil and Coffee.
3. Easy Fill Set PB0007.
4. Mounting Set for Hand Oil Screw Press PB0011.
5. Nutcracker - Nut Crusher Steel PB0008 or Nutcracker - Nut Crusher Steel with Clamps PB0009.
6. Food Dehydrator.

Follow the below procedure, to produce Oil Olive from Dried Crushed Olives, using the Hand Oil Screw Press with the Cap D2.

1. Crush the fresh olives with the Nutcracker - Nut Crusher Steel.
2. Dry the olives with food dehydrator until the olives are completely dry.



3. The dried olives including the kernels.
4. Add 100 ml water to 1 kilo of dried olives and leave it in a bag for 1 day. Βe sure they contain exactly 10% moisture.
5. Put the Cap D2 to the Hand Oil Screw Press and press the olives with kernels.



6. Press at room temperature and use the burner with a very small flame.
7. Press the olives slightly so they are properly transported by the screw. Make sure the screw is not too full, otherwise the oil will not flow to the oil outlet slit.
8. Clean the oil outlet slit, regularly with the brush.
9. The olive oil flowing from the oil outlet slit.
10. The press cake leaves the Cap D2. The lighter the color of the cake, the more olive oil is extracted.
11. Pure olive oil! Freshly pressed!



12. The pressure is determined with the adjusting bolt. Open or close regularly, depending on the press result. Make sure that the press cake continuously comes out of the cap, otherwise it runs back into the press and the oil outlet slit gets clogged.
13. The fresh olive oil just after pressing is cloudy.
14. The olive oil becomes clearer after 1 day of settling.
15. After 2 days, the olive oil is clear enough for use. So no filter is needed.

Coffee Grinding

Transform your Hand Oil Screw Press into a Coffee Grinder - Coffee Mill with the Cap D2 and the L-shaped washer. Grind your favorite coffee beans and choose the grinding quality of your coffee!

To grind coffee beans you need the following products:

1. Hand Oil Screw Press PB0001.
2. Cap D2 for Hand Oil Screw Press to Produce Olive Oil and Coffee.
3. Easyfill Set PB0007.

Replace the Cap D1 of the standard equipment, with the Cap D2 and transform your Hand Oil Screw Press into a Coffee Grinder - Coffee Mill. Make sure that you have put the L-shaped washer in the Cap D2. The edge side of L-shaped washer must facing the press cage. Tighten the Cap D2 on the press cage. The L-shaped washer leaves some more space between screw and washer than when the flat washer is used.

Fill with the Easyfill Set PB0007 the Hand Oil Screw Press with roasted coffee. Turn the crank and you will get well ground coffee. If you want an extra fine grinding, grind it for a second time. The quality of ground coffee is excellent and ideal for filter coffee and espresso machines!

Useful Tips

1. Do not use the burner.
2. Do not use the adjustment bolt.
3. For coarser grinding: loosen the Cap D2.
4. For extra fine grinding: grind the coffee twice.

Watch below how you can use the Hand Oil Screw Press to press olives and produce olive oil.

On the video below watch the general presentation of the Hand Oil Screw Press. See how you assemble it and learn the general instructions of proper use. Learn how you can press oil seeds and produce all kinds of oils.

Watch on the video below how we grind, easy and quick, coffee beans to produce any kind of coffee: espresso, filter coffee or greek coffee!